Check whether the channels around the die casting machine are unobstructed, blocked and abnormal. At the same time, develop the habit of adding enough lubricating oil when the die casting machine starts to operate, confirm each part before daily operation, and check the casting conditions.
Die casting machine can be used to die cast various parts, which is widely used in the automotive industry. When using the die casting machine, you also need to pay attention to cleaning and maintenance. If it is not cleaned for a long time, it is easy to rust and become dull and difficult to use. Pay attention to the importance of cleaning and maintenance of die casting machine.
It is very difficult to ensure that every equipment can work in a good environment. Sometimes some customers only pay attention to the use and making money, and often ignore the important maintenance problems. When there are impurities such as dust, putty and aluminum chips on the equipment and they are not cleaned in time, the moving formwork will be worn during movement, and the equipment will be easy to rust after wear, It will also greatly shorten the service life.
When the guide rail is covered with dust, the guide rail will be pulled and damaged. We need to keep the moving part of the equipment clean at all times. Although small dust is just a big deal, if the equipment is in motion friction and there are small particles between the two parts, the parts will inevitably be damaged after a long time of friction. The water and gas pipeline of the equipment needs to be sealed as much as possible. If the water stays in the base part for a long time, it will easily lead to rust and damage of the base part.
